• Plates

  • Sheets

  • Round Bar / Bar

  • Tube / Extrusions

6082

BS L113 / AlSi1MgMn / 6082 / T6

Chemical Properties % Value
Silicon (Si)0,70 - 1,30
Chromium (Cr)0,00 - 0,25
Manganese (Mn)0,40 - 1,00
Magnesium (Mg)0,60 - 1,20
Copper (Cu)0,00 - 0,10
Titanium (Ti)0,00 - 0,10
Iron (Fe)0,00 - 0,50
Zinc (Zn)0,00 - 0,20
Aluminium (Al)Balance
Physical Properties Value
Density2.71 g/cm³
Melting Point575 °C
Thermal Expansion23.1 x 10^-6 /K
Modulus of Elasticity71 GPa
Thermal Conductivity170 W/m.K
Electrical Resistivity%44 IACS
Mechanical Properties Value
Proof Strength270 MPa
Yield Strength330
Elongation A50 mm%16
Modulus of Elasticity71 GPa

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. 

ALLOY DESIGNATIONS
Aluminium alloy 6082, BS L113  also corresponds to the following standard designations and specifications but may not be a direct equivalent:

 

Alloy 6082
HS30
DIN 3.2315
EN AW-6082
ISO AlSi1MgMn
UNS A96082

 

TEMPER TYPES
BS L113, 6082 is supplied in a wide range of tempers:

 

  • O - Soft
  • T6 - Solution heat treated and artificially aged
  • T4 - Solution heat treated and naturaly aged to a substantially stable condition
  • T651 - Solution heat treated, stress relieved by stretching then artificially aged
  • T6511 - Solution heat-treated, stress-relieved by controlled stretching and minor straightening is allowed after stretching to comply with standard tolerances then artificially aged. 

 

SUPPLIED FORMS
6082 is supplied in plate, bar, round bar, tube, extrusion and sheet.
  • Plate
  • Sheet
  • Round Bar / Bar
  • Tube / Extrusion 
DELIVERY: