• لوحات/ طباقات

  • صاج

  • قضيب

  • أنابيب

2219

AMS 4168 / AlCu6Mn / 2219 / T351

Chemical Properties % Value
Silicon (Si)0,00 - 0,20
Manganese (Mn)0,20 - 0,40
Magnesium (Mg)0,00 - 0,02
Copper (Cu)5,80 - 6,80
Titanium (Ti)0,02 - 0,10
Iron (Fe)0,00 - 0,30
Zinc (Zn)0,00 - 0,10
Aluminium (Al)Balance
Physical Properties Value
Density2.85 g/cm³
Melting Point543 °C
Thermal Expansion22 x 10^-6 /K
Modulus of Elasticity74 GPa
Thermal Conductivity120 W/m.K
Electrical Resistivity%30 IACS
Mechanical Properties Value
Proof Strength300 MPa
Yield Strength360 MPa
Elongation A50 mm%8
Modulus of Elasticity74 GPa

A medium to high strength alloy with, dependent upon temper, minimum Proof Stress up to 57 ksi / 390 Mpa and minimum Tensile Strength up to 66 ksi / 455 MPa

ALLOY DESIGNATIONS

Aluminium alloy 2024 has similarities to the following standard designations and specifications:

AMS QQ-A-250/4,  Alloy 2024,  UNS A92024

AMS 4041,  DIN AlCuMg2

AMS 4036, ISO AlCu4Mg

 

TEMPER TYPES

2024 is supplied in a wide range of tempers:
T351 is intended to provide material with low residual stresses and thus minimal distortion during machining, but does not provide optimal corrosion resistance.

  • O - Soft
  • T3 - Solution heat treated, cold worked and naturally aged
  • T42 - Solution heat treated and naturaly aged to a substantially stable condition
  • T81 - Solution heat treated, cold worked then artificially aged
  • T351 - Solution heat treated then stress relieved by stretching. Equivalent to T4 condition.
  • T4 - Solution heat treated and naturaly aged to a substantially stable condition
  • T62 - Solution heat treated then artificially aged by the user
  • T851 - Solution heat treated then stress relieved by stretching then artificially aged.
  • T361 - Solution heat treated then stress relieved by stretching.
  • T72 - Solution heat treated then specially artificially aged for resistance to stress corrosion
  • T861

 

SUPPLIED FORMS

Alloy AMS 4037  is supplied in plate and sheet

  • Plate
  • Sheet
DELIVERY: