5754

EN AW / AlMg3 / 5754 / H38

Chemical Properties % Value
Silicon (Si)0,00 - 0,25
Chromium (Cr)0,05 - 0,20
Manganese (Mn)0,50 - 1,00
Magnesium (Mg)4,70 - 5,50
Copper (Cu)0,00 - 0,10
Titanium (Ti)0,00 - 0,20
Iron (Fe)0,00 - 0,40
Zinc (Zn)0,00 - 0,25
Aluminium (Al)Balance
Physical Properties Value
Density2,66 g/cm³
Melting Point568 °C
Thermal Expansion23.9 x 10^-6 /K
Modulus of Elasticity69 GPa
Thermal Conductivity120 W/m.K
Electrical Resistivity%29 IACS
Mechanical Properties Value
Proof Strength260 MPa
Yield Strength330 MPa
Elongation A50 mm%5
Modulus of Elasticity69 GPa
Aluminium alloy 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres.

 

ALLOY DESIGNATIONS
Aluminium alloy EN AW 5754 has similarities to the following standard designations and specifications ;

Alloy 5754 UNS A95754, ASTM B209

DIN AlMg3

 
 
TEMPER TYPES
5754 is supplied in a wide range of tempers:
  • O - Soft
  • H111 - Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.
  • H112 - Applies to alloys that acquire some temper from shaping processes which do not have special control over the amount of strain-hardening or thermal treatment, but for which there are mechanical property limits.
  • H28 - Strain-hardened and partially annealed - 4/4 hard (fully hardened).
  • H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard
  • H34 - Strain-hardened and stabilized - 1/2 hard.
  • H36 - Strain-hardened and stabilized - 3/4 hard.
  • H38 - Strain-hardened and stabilized - 4/4 hard (fully hardened).

 

SUPPLIED FORMS
5754 is supplied in plate, sheet, bar and extrusions.
  • Plate
  • Sheet
  • Round Bar / Bar
  • Tube / Extrusions
DELIVERY: