5086

EN AW / AlMg4 / 5086 / H111

化学性质 % 值
Silicon (Si)0,00 - 0,40
Manganese (Mn)0,20 - 0,70
Magnesium (Mg)3,50 - 4,50
Copper (Cu)0,00 - 0,10
Chromium (Cr)0,05 - 0,25
Zinc (Zn)0,00 - 0,25
Iron (Fe)0,00 - 0,50
物理特性
Density2,66 g/cm³
Melting Point585 °C
Thermal Expansion23.8 x10^-6 /K
Modulus of Elasticity71 GPa
Thermal Conductivity130 W/m.K
Electrical Resistivity%31 IACS
机械性能
Proof Strength150 MPa
Yield Strength280 MPa
Elongation A50 mm%20
Modulus of Elasticity71 GPa
5086 aluminum exhibits higher strength than 5052 and has excellent corrosion resistance in marine and salt water environments. It is easy to form, stamp and weld.

 

ALLOY DESIGNATIONS
Aluminium alloy EN AW 5086 has similarities to the following standard designations and specifications ;

Alloy 5086 UNS A95086, ASTM B209

DIN AlMg4

 
TEMPER TYPES
Alloy QQ-A-250/7, 5086 is supplied in a wide range of tempers:
  • O - Soft
  • H112 - Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified).
  • H116 - Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified.
  • H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard
  • H34 - Stabilised - A low temperature thermal treatment or heat introduced during manufacture which stabilises the mechanical properties and relieves residual internal stress, plus usually improves ductility
  • H36 - Strain-hardened and stabilized - 3/4 hard.
     

 

SUPPLIED FORMS
5086 is supplied in plate, sheet, bar and extrusions.
  • Plate
  • Sheet
  • Round Bar / Bar
  • Tube / Extrusions
交货: