7150
EN AW / AlZn6Mg2Cu / 7150 / T7751
化学性质 | % 值 |
Silicon (Si) | 0,00 - 0,12 |
Chromium (Cr) | 0,00 - 0,04 |
Manganese (Mn) | 0,00 - 0,10 |
Magnesium (Mg) | 2,00 - 2,70 |
Copper (Cu) | 1,9 - 2,50 |
Titanium (Ti) | 0,00 - 0,06 |
Iron (Fe) | 0,00 - 0,15 |
Zinc (Zn) | 5,90 - 6,90 |
Aluminium (Al) | Balance |
物理特性 | 值 |
Density | 2,83 g/cm³ |
机械性能 | 值 |
Proof Strength | 565 MPa |
Yield Strength | 607 MPa |
Elongation A50 mm | %11 |
Alloy 7150 is the highest strength aluminum plate alloy/temper currently available for commercial aircraft applications.
ALLOY DESIGNATIONS
EN AW 7150 has similarities to the following standard designations and specifications ;
Alloy 7150 UNS A97150 ASTM B209
DIN AlZn6Mg2Cu
TEMPER TYPES
7150 is supplied in a wide range of tempers:
- T6151 - Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate) and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching.
- T61511 - Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate) and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching except that minor straightening is allowed after stretching to comply with standard tolerances.
- T7751 - Solution heat-treated, stress-relieved by controlled stretching and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products recieve no further straightening after stretching.
- T77511 - Solution heat-treated, stress-relieved by controlled stretching and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products recieve no further straightening after stretching.except that minor straightening is allowed after stretching to comply with standard tolerances.
SUPPLIED FORMS
7075 is supplied in plate, and extrusions.
- Plate
- Tube / Extrusions
交货:
机械性能 | |||
厚度 (mm) | 证明力量 (Min.) | 屈服强度 (Min.) | Uzama % |
25,4 mm | 565 MPa | 607 MPa | %11 |