2011

EN AW / AlCu6BiPb / 2011 / T3

Chemical Properties % Value
Silicon (Si)0,40 Max
Copper (Cu)3,90 - 5,00
Lead (Pb)0,20 - 0,60
Iron (Fe)0,70 Max
Zinc (Zn)0,00 - 0,20
Nickel (Ni)0,00 - 0,20
Aluminium (Al)Balance
Physical Properties Value
Density2.82 g/cm³
Melting Point540 °C
Thermal Expansion22.9 x 10^-6 /K
Modulus of Elasticity70 GPa
Thermal Conductivity150 W/m.K
Electrical Resistivity%39 IACS
Mechanical Properties Value
Proof Strength290 MPa
Yield Strength340 MPa
Shear Strength220 MPa

5L36 - 1050A has excellent characteristic properties: Very good atmospheric corrosion resistance. Very good workability. High thermal and electrical conductivity (preferred alloy 1350). Attractive appearance, high reflectivity. Suitable for decorative anodising. Very good weldability with low mechanical properties.

ALLOY DESIGNATIONS

Aluminium alloy 5L36 - 1050A is covered by Standard BS EN 5L36 (1985) 

TEMPER TYPES

The most common tempers for 5L36 - 1050A aluminium wire / rivet stock is as-drawn

SUPPLIED FORMS

L36-1050A aluminium is supplied in Wire as rivet stock.

  • Round Bar
  • Wire
DELIVERY:
Mechanical Properties
Thickness (mm) Proof Strength (Min.) Yield Strength (Min.) Elongation A50 mm %
Over 3,17 up to & incl. 38,1 260 MPa 310 MPa %10
Over 38,13 up to & incl. 50,8 235 MPa 295 MPa %10
Over 50,83 up to & incl. 82,5 205 MPa 290 MPa %14