SPACE 2009
Quality Policy
AS 9120
Листы/Плиты
Лист
Бар/Листовая Сталь
Трубы/Профили
1050 / 1050A
BS 1B / Al99.5 / 1050 / 1050A / O
| Chemical Properties | % Value |
| Silicon (Si) | 0,00 - 0,25 |
| Manganese (Mn) | 0,00 - 0,05 |
| Magnesium (Mg) | 0,00 - 0,05 |
| Copper (Cu) | 0,00 - 0,05 |
| Titanium (Ti) | 0,00 - 0,03 |
| Iron (Fe) | 0,00 - 0,40 |
| Zinc (Zn) | 0,00 - 0,05 |
| Aluminium (Al) | Balance |
| Physical Properties | Value |
| Density | 2.705 g/cm³ |
| Melting Point | 646 °C |
| Thermal Expansion | 23.6 x 10^-6 /K |
| Modulus of Elasticity | 73 GPa |
| Thermal Conductivity | 155 W/m.K |
| Mechanical Properties | Value |
| Proof Strength | 28 MPa |
| Yield Strength | 76 MPa |
| Shear Strength | 51 MPa |
| Elongation A50 mm | %39 |
| Modulus of Elasticity | 69 GPa |
Aluminium alloy 1050 H0 plate is a popular grade of aluminium for general sheet metal work where moderate strength is required.
ALLOY DESIGNATIONS
Aluminium alloy 1050 / 1050A, BS 1B has s imilarities to the following standard designations and specifications ;
1050 / 1050A, UNS A91050
ISO Al99.5, 3.0255
TEMPER TYPES
The most common tempers for 1050 / 1050A aluminium are:
- O - Soft
- H14 - Strain-hardened - 1/2 hard.
- H24 - Work hardened then partially annealed to half hard
- H34 - applied to alloys which, unless stabilised, gradually age-soften at room temperature.
SUPPLIED FORMS
1050 / 1050A aluminium is supplied in in plate, sheet and bar.
- Plate
- Sheet
- Bar
DELIVERY:
Калькулятор Веса