• Plates

  • Sheets

  • Rod / Round Bar / Flat Bar

  • Tube / Extrusions / Profile

5754

CR 1.1.0.18 / AlMg3 / 5754 / O / H111

Chemical Properties % Value
Silicon (Si)0,00 - 0,25
Chromium (Cr)0,05 - 0,20
Manganese (Mn)0,50 - 1,00
Magnesium (Mg)4,70 - 5,50
Copper (Cu)0,00 - 0,10
Titanium (Ti)0,00 - 0,20
Iron (Fe)0,00 - 0,40
Zinc (Zn)0,00 - 0,25
Aluminium (Al)Balance
Physical Properties Value
Density2,66 g/cm³
Melting Point568 °C
Thermal Expansion23.9 x 10^-6 /K
Modulus of Elasticity69 GPa
Thermal Conductivity120 W/m.K
Electrical Resistivity%29 IACS
Mechanical Properties Value
Proof Strength250 MPa
Yield Strength330 MPa
Elongation A50 mm%13
Modulus of Elasticity69 GPa
Aluminium alloy 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres.

 

ALLOY DESIGNATIONS
Aluminium alloy 5754 has s imilarities to the following standard designations and specifications ;

Alloy 5754, UNS A95754, ASTM B209

ISO AlMg3, 3.3535

 
 
TEMPER TYPES
5754 is supplied in a wide range of tempers:
  • O - Soft
  • H111 - Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.
  • H112 - Applies to alloys that acquire some temper from shaping processes which do not have special control over the amount of strain-hardening or thermal treatment, but for which there are mechanical property limits.
  • H28 - Strain-hardened and partially annealed - 4/4 hard (fully hardened).
  • H32 - Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard
  • H34 - Strain-hardened and stabilized - 1/2 hard.
  • H36 - Strain-hardened and stabilized - 3/4 hard.
  • H38 - Strain-hardened and stabilized - 4/4 hard (fully hardened).

 

SUPPLIED FORMS
5754 is supplied in plate, sheet, bar and extrusions.
  • Plate
  • Sheet
  • Round Bar / Bar
  • Tube / Extrusions
DELIVERY: