SPACE 2009
Quality Policy
AS 9120
Platten
Blech
Rundstangen
Rohre/ Extrusion/ Profil
6061
AMS 4025 / AlMg1SiCu / 6061 / O
| Chemical Properties | % Value |
| Silicon (Si) | 0,40 - 0,80 |
| Chromium (Cr) | 0,04 - 0,35 |
| Manganese (Mn) | 0,00 - 0,15 |
| Magnesium (Mg) | 0,80 - 1,20 |
| Copper (Cu) | 0,15 - 0,40 |
| Titanium (Ti) | 0,00 - 0,15 |
| Iron (Fe) | 0,00 - 0,70 |
| Zinc (Zn) | 0,00 - 0,25 |
| Aluminium (Al) | Balance |
| Physical Properties | Value |
| Density | 2.70 g/cm³ |
| Melting Point | 582 °C |
| Thermal Expansion | 23.6 µm/m.°C |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 170 W/m.K |
| Electrical Resistivity | 46.5 % IACS |
| Mechanical Properties | Value |
| Proof Strength | 76 MPa |
| Yield Strength | 124 MPa |
| Shear Strength | 84 MPa |
| Elongation A50 mm | %20 |
| Hardness | 33 HB |
6061 O aluminum exhibits mid strength and is widely used in aerospace applications.
ALLOY DESIGNATIONS
6061 O has the following standard designations and specifications.
As Plate/Sheet; 6061 O, AMS 4025, AMS QQ-A-250/11, EN 2694, AIR 9048.210/230, UNS A96061, WNR 3.3211, ASTM B209
As Cold Drawn Round/Flat Bar and Tube; 6061 O, AMS 4115, BACM 171, UNS A96061, WNR 3.3211, ISO AlMg1SiCu, ASTM B211
As Seamless Cold Drawn Round/Flat Bar and Tube; 6061 O, AMS 4079 (Close tolerance), AMS 4080, UNS A96061, WNR 3.3211, ISO AlMg1SiCu, ASTM B241
As Extruded Round/Flat Bar and Tube; 6061 O, AMS 4160, UNS A96061, WNR 3.3211, ISO AlMg1SiCu, ASTM B221
Choosing Factors for 6061 O
- Strength: Average
- Machining: Fair
- Weldability: Very good
- Formability: Good
- Corrosion Resistance: Great
- Heat Treating: Yes
Some Well-Known Applications for 6061 O
It has many uses, including transportation, recreational products,
Pipelines and aircraft parts,
And in general, the aerospace industry.
SUPPLIED FORMS
6061 O is produced/supplied in plate/sheet round/flat bar and tube/profile forms.
- Rod / Round Bar / Flat Bar
- Plate
- Sheet
- Tube/Profile
DELIVERY:
| Mechanical Properties | |||
| Thickness (mm) | Proof Strength (Min.) | Yield Strength (Min.) | Elongation A50 mm % |
| Over 0.2 up to & incl. 0.5 | 83 | 152 | %14 |
| Over 0.5 up to & incl. 3.2 | 83 | 152 | %16 |
| Over 3.2 up to & incl. 12.8 | 83 | 152 | %18 |
Gewichts-Kalkulator