SPACE 2009
Quality Policy
AS 9120
5454
EN AW / AlMg3Mn / 5454 / H34
| Chemical Properties | % Value |
| Silicon (Si) | 0,00 - 0,25 |
| Chromium (Cr) | 0,05 - 0,20 |
| Manganese (Mn) | 0,50 - 1,00 |
| Magnesium (Mg) | 2,40 - 3,00 |
| Copper (Cu) | 0,0 - 0,10 |
| Titanium (Ti) | 0,00 - 0,20 |
| Iron (Fe) | 0,00 - 0,40 |
| Zinc (Zn) | 0,00 - 0,25 |
| Aluminium (Al) | Balance |
| Physical Properties | Value |
| Density | 2.68 g/cm³ |
| Melting Point | 602 °C |
| Thermal Expansion | 23.6 µm/m.°C |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 130 W/m.K |
| Electrical Resistivity | 34% IACS |
| Mechanical Properties | Value |
| Proof Strength | 230 MPa |
| Yield Strength | 303 MPa |
| Shear Strength | 180 MPa |
| Elongation A50 mm | 8% |
| Hardness | 81 HB |
This alloy is primarily used in areas where good formability is required, it is used in O, H112, H32, H34;
to specification ASTM B209 Tempers and is an excellent choice for large pressure vessels and certain marine fabricated products. The formability is at its best in the soft 0 temper, but also sometimes used in H32 or H34 tempers too. However the strength and corrosion resistance are not always as good as other alloys, so as always a marine structural engineer should be consulted for each application.
to specification ASTM B209 Tempers and is an excellent choice for large pressure vessels and certain marine fabricated products. The formability is at its best in the soft 0 temper, but also sometimes used in H32 or H34 tempers too. However the strength and corrosion resistance are not always as good as other alloys, so as always a marine structural engineer should be consulted for each application.
ALLOY DESIGNATIONS
5454 H34 has the following standard designations and specifications.
Sheets per; 5454 H34, ISO AlMg3Mn, DIN AlMg2.7Mn, WNR 3.3537, UNS A95454, ASTM B209, AMS QQ-A-250/10
Extruded Round/Flat Bar and Tubes per; 5454 H34, ISO AlMg3Mn, DIN AlMg2.7Mn, WNR 3.3537, UNS A95454, ASTM B221, AMS QQ-A-200/6
Choosing Factors for 5454 H34
- Strength: Medium
- Machining: Satisfactory
- Weldability: Good
- Formability: Perfect
- Corrosion Resistance: Very good
- Heat Treating: None
Some Well-Known Applications for 5454 H34
In packaging machines,
In electric poles,
Also it is used as a component of rivets.
SUPPLIED FORMS
5454 H34 is produced/supplied in the sheet, round/flat bar, tube/profile forms.
- Sheet
- Round/Flat Bar
- Tube/Profile
DELIVERY:
Weight Calculator