SPACE 2009
Quality Policy
AS 9120
Cold Drawn Round Bar
Cold Drawn Tube
2030
Cold Drawn/Finished (CF) / AlCu4PbMg (Soğuk Çekim) / 2030 / T3
| Chemical Properties | % Value |
| Silicon (Si) | 0,00 - 0,80 |
| Chromium (Cr) | 0,00 - 0,10 |
| Manganese (Mn) | 0,20 - 1,00 |
| Magnesium (Mg) | 0,50 - 1,00 |
| Copper (Cu) | 3,50 - 4,50 |
| Titanium (Ti) | 0,00 - 0,20 |
| Iron (Fe) | 0,00 - 0,70 |
| Zinc (Zn) | 0,00 - 0,50 |
| Lead (Pb) | 0,80 - 1,00 |
| Aluminium (Al) | Balance |
| Physical Properties | Value |
| Density | 2.81 g/cm³ |
| Melting Point | 520 °C |
| Thermal Expansion | 23 µm/m.°C |
| Modulus of Elasticity | 73.6 GPa |
| Thermal Conductivity | 130 W/m.K |
| Electrical Resistivity | 34% IACS |
| Mechanical Properties | Value |
| Proof Strength | 250 MPa |
| Yield Strength | 390 MPa |
| Shear Strength | 230 MPa |
| Elongation A50 mm | 7% |
| Hardness | 115 HB |
A medium to high strength alloy with, dependent upon temper, minimum Proof Stress up to 57 ksi / 390 Mpa and minimum Tensile Strength up to 66 ksi / 455 MPa
ALLOY DESIGNATIONS
Aluminium alloy 2030 T3 has similarities to the following standard designations and specifications:
Cold Drawn Round/Flat Bars per; 2030 T3, ISO AlCu4PbMg, DIN AlCuMgPb , UNS A92030, ASTM B211, AFNOR AU4Pb
Cold Drawn Tubes per; 2030 T3, ISO AlCu4PbMg, DIN AlCuMgPb , UNS A92030, ASTM B210, AFNOR AU4Pb
Choosing Factors for 2030 T3
- Strength: Very good
- Machining: Exquisite
- Weldability: Satisfactory
- Formability: Average
- Corrosion Resistance: Weak
- Heat Treating: Yes
Some Well-Known Applications for 2030 T3
In hydraulic pistons,
Forgings and machined products,
It is also highly used in the automotive industry.
SUPPLIED FORMS
2030 T3 is supplied in round/flat bar and tube/ profile forms.
- Flat/round bar
- Tube/profile
DELIVERY:
Weight Calculator